Home > Crystals >

Low jitter oscillator SILICON LABS 535AC150M000DGR featuring IC based design and frequency stability

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Low jitter oscillator SILICON LABS 535AC150M000DGR featuring IC based design and frequency stability

Frequency Stability : ±7ppm

Voltage - Supply : 3.3V

Operating Temperature : -40℃~+85℃

Frequency : 150MHz

Description : Oscillator 150MHz LVPECL 3.3V SMD7050-6P

Mfr. Part # : 535AC150M000DGR

Model Number : 535AC150M000DGR

Package : SMD7050-6P

Contact Now

Product Overview

The Skyworks Si535/536 is an ultra-low jitter crystal oscillator (XO) utilizing advanced DSPLL circuitry to deliver high-speed differential clocks. Unlike traditional XOs, it uses a single fixed crystal to generate a wide range of output frequencies, offering superior frequency stability and reliability. Its IC-based design provides excellent supply noise rejection, simplifying clock generation in noisy communication system environments. The Si535/536 is factory programmed, reducing lead times for custom oscillators and is available in a 5 x 7 mm package.

Product Attributes

Brand: Skyworks Solutions, Inc.
Technology: DSPLL circuitry
Package: 5 x 7 mm
Compliance: Pb-free/RoHS-compliant
Material: Gold over Nickel contact pads

Technical Specifications

Parameter	Symbol	Test Condition	Min	Typ	Max	Unit	Notes
Recommended Operating Conditions
Supply Voltage (3.3 V option)	VDD		2.97	3.3	3.63	V	Selectable parameter specified by part number.
Supply Voltage (2.5 V option)	VDD		2.25	2.5	2.75	V	Selectable parameter specified by part number.
Supply Current (Output enabled, LVPECL)	IDD			111	121	mA
Supply Current (Output enabled, LVDS)	IDD			90	98	mA
Supply Current (Tristate mode)	IDD			60	75	mA
Output Enable (OE) VIH	VIH		0.75 x VDD			V	OE pin includes a 17 k pullup resistor to VDD.
Output Enable (OE) VIL	VIL				0.5	V	OE pin includes a 17 k pullup resistor to VDD.
Operating Temperature Range	TA		40		85	C
CLK Output Frequency Characteristics
Nominal Frequency	fO	LVPECL/LVDS	100		312.5	MHz	See Section 3. "Ordering Information" for available frequencies.
Initial Accuracy	fi	Measured at +25 C at time of shipping		1.5		ppm
Temperature Stability (20 ppm option)			20		+20	ppm	Selectable parameter specified by part number.
Temperature Stability (7 ppm option)			7		+7	ppm	Selectable parameter specified by part number.
Aging (Frequency drift over first year)	fa				3	ppm
Aging (Frequency drift over 20 year life)	fa				10	ppm
Total Stability (Temp stability = 20 ppm)					31.5
Total Stability (Temp stability = 7 ppm)					20
Powerup Time	tOSC	TA = 40C to +85C			10	ms	Time from powerup or tristate mode to fO.
CLK Output Levels and Symmetry
LVPECL Mid-level Output Voltage	VO	50 to VDD 2.0 V	VDD 1.42		VDD 1.25	V
LVPECL Differential Voltage Swing	VOD		1.1		1.9	VPP
LVPECL Single-ended Voltage Swing	VSE		0.55		0.95	VPP
LVDS Mid-level Output Voltage	VO	Rterm = 100 (differential)	1.125	1.20	1.275	V
LVDS Differential Voltage Swing	VOD	Rterm = 100 (differential)	0.5	0.7	0.9	VPP
Rise/Fall time (20/80%)	tR, tF				350	ps
Symmetry (duty cycle) Differential	SYM		45		55	%
CLK Output Phase Jitter
Phase Jitter* (RMS)	J	10 kHz to 1 MHz (data center)		0.19	0.35	ps	Applies to output frequencies: 156.25 MHz.
Phase Jitter* (RMS)	J	12 kHz to 20 MHz brickwall		0.25	0.40	ps	Applies to output frequencies: 156.25 MHz.
CLK Output Period Jitter
Period Jitter* RMS	JPER	N = 1000 cycles		2		ps
Period Jitter* Peak-to-Peak	JPER	N = 1000 cycles		14		ps
Environmental Compliance
Mechanical Shock		MIL-STD-883, Method 2002	Meets requirements
Mechanical Vibration		MIL-STD-883, Method 2007	Meets requirements
Solderability		MIL-STD-883, Method 2003	Meets requirements
Gross & Fine Leak		MIL-STD-883, Method 1014	Meets requirements
Resistance to Solder Heat		MIL-STD-883, Method 2036	Meets requirements
Moisture Sensitivity Level		J-STD-020, MSL1	Meets requirements
Thermal Characteristics (Typical values TA = 25 C, VDD = 3.3 V)
Thermal Resistance Junction to Ambient	JA	Still Air		84.6		C/W
Thermal Resistance Junction to Case	JC	Still Air		38.8		C/W
Ambient Temperature	TA		40		85	C
Junction Temperature	TJ				125	C
Absolute Maximum Ratings
Maximum Operating Temperature	TAMAX				85	C	Stresses beyond those listed may cause permanent damage.
Supply Voltage, 2.5/3.3 V Option	VDD		0.5		+3.8	V	Stresses beyond those listed may cause permanent damage.
Input Voltage (any input pin)	VI		0.5		VDD + 0.3	V	Stresses beyond those listed may cause permanent damage.
Storage Temperature	TS		55		+125	C	Stresses beyond those listed may cause permanent damage.
ESD Sensitivity (HBM, per JESD22-A114)	ESD			2500		V
Soldering Temperature (Pb-free profile)	TPEAK				260	C	Compliant with JEDEC J-STD-020C.
Soldering Temperature Time @ TPEAK (Pb-free profile)	tP		20		40	seconds	Compliant with JEDEC J-STD-020C.

2508281722_SILICON-LABS-535AC150M000DGR_C2030291.pdf

Low jitter oscillator SILICON LABS 535AC150M000DGR featuring IC based design and frequency stability Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!